| 1. | Top Discharge Centrifuges in Three Point Pendulum Suspension Types. Manual Discharge of
Cake. |
| 2. | Top Discharge Centrifuges, in Four Point Suspension Types. Manual Discharge of Cake. Machine
will be based on Inertia Plate and mounted on Viscous Dampers. |
| 3. | Bag-Lifting Centrifuges in Three Point Pendulum Suspension Types. The Bag will be fitted to a
Lifting Ring and Lifted by means of Chain Pulley Block. We do not supply the Chain Pulley Block. It has to be
provided by the customer. Our scope is only upto the Lifting ring. |
| 4. | Bag-Lifting Centrifuges in Four Point Suspension Types. Machine will be based on Inertia
Plate and mounted on Viscous Dampers. Same as above fior Lifting arrangement. |
| 5. | Bottom Discharge Centrifuges in Four Point Suspension with Hydraulic Single Action or
Hydraulic Dual Action Scraping arrangement. |
In Top Discharge and Bag-Lifting Three
Point Pendulum Suspension Models, we can offer the following features:
 |
|
| |
Full Lid Opening either Pneumatic or Hydraulic. |
| |
Half Lid Opening Manual. C.I.P System |
| |
A C Drive system (Make of drive as per the customers choice) |
| |
Zero Speed Interlock |
| |
Stainless Steel 316 cladding for C.I.Base, Triangle, Pendulum Legs |
| |
Fluid Coupling etc. |
In Top Discharge and Bag-Lifting Four Point Suspension Models, we can offer the following features:
|
|
| |
Full Lid Opening either Pneumatic or Hydraulic. |
| |
Half Lid Opening Manual |
| |
Full Body Opening CGMP Type - Hydraulic |
| |
C.I.P System |
| |
A C Drive system (Make of drive as per the customers choice) |
| |
Zero Speed Interlock Fluid Coupling |
| |
Stainless Steel cladding for Viscous Dampers etc. |
[ Top of Page ]
|
In Bottom Discharge Centrifuges all machines are Four Point Suspension only. All machines will be with AC Drive system. The following features can be provided
|
|
| |
Full Lid Opening either Pneumatic or Hydraulic. |
| |
Half Lid Opening Manual |
| |
Full Body Opening CGMP Type - Hydraulic |
| |
CIP System |
| |
A C Drive system (Make of drive as per the customers choice) |
| |
Zero Speed Interlock |
| |
Stainless Steel cladding for Viscous Dampers |
| |
Pneumatic Residual heel System etc. |
At the enquiry stage itself, if the customer is able to tell us of the features he requires, it could make
things easier.
Our Centrifuges can be offered in different Materials of Construction as below:
|
For Top Discharge and
Bag-Lifting:
Stainless Steel 316 / 304 / 904 L
Rubber Lining (Natural Rubber / Neoprene Rubber)
on Mild Steel
HALAR & PVDF lining on Stainless Steel
Hastealloy / Alloy - 20
|
For Bottom Discharge:
Stainless
Steel 316 / 304 / 904 L
HALAR & PVDF lining on Stainless Steel
Hestalloy / Alloy - 20
|
Sizes are not a constraint. However, the
following are the regular sizes: |
| Basket Diameter |
Height |
Capacity - Kgs. |
|
| 36' (900 mm) |
18'' (450 mm)
20'' (500 mm)
21''
(525 mm) |
150
180
200 |
|
|
| 48'' (1200 mm) |
20'' (500 mm)
upto
26'' (650
mm) |
260
425 |
|
|
| 60' (1500 mm) |
20'' (500 mm)
26'' (650 mm)
30''
(750 mm) |
500
650
750 |
|
|
All capacities are based on Bulk density
- 1(one)
i.e to say, If the material being Centrifuged has a Bulk density of 1, then in a 36'' x 18''
machine, would give an output of 150 Kgs. In case the Bulk Density is 0.5, then the output would be 75 Kgs
and so on.
|
[ Top of Page ]
|
